HomePhorge
Diffusion Phorge (master) Code

phorge/conf/default.conf.php
25dee6ecd2a0master

Last Change
Raw File

default.conf.php
View Options

<?php
/*
* Copyright 2011 Facebook, Inc.
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
return array(
// The root URI which Phabricator is installed on.
// Example: "http://phabricator.example.com/"
'phabricator.base-uri' => null,
// If you have multiple environments, provide the production environment URI
// here so that emails, etc., generated in development/sandbox environments
// contain the right links.
'phabricator.production-uri' => null,
// The default PHID for users who haven't uploaded a profile image. It should
// be 50x50px.
'user.default-profile-image-phid' => 'PHID-FILE-4d61229816cfe6f2b2a3',
// -- Access Control -------------------------------------------------------- //
// Phabricator users have one of three access levels: "anyone", "verified",
// or "admin". "anyone" means every user, including users who do not have
// accounts or are not logged into the system. "verified" is users who have
// accounts, are logged in, and have satisfied whatever verification steps
// the configuration requires (e.g., email verification and/or manual
// approval). "admin" is verified users with the "administrator" flag set.
// These configuration options control which access level is required to read
// data from Phabricator (e.g., view revisions and comments in Differential)
// and write data to Phabricator (e.g., upload files and create diffs). By
// default they are both set to "verified", meaning only verified user
// accounts can interact with the system in any meaningful way.
// If you are configuring an install for an open source project, you may
// want to reduce the "phabricator.read-access" requirement to "anyone". This
// will allow anyone to browse Phabricator content, even without logging in.
// Alternatively, you could raise the "phabricator.write-access" requirement
// to "admin", effectively creating a read-only install.
// Controls the minimum access level required to read data from Phabricator
// (e.g., view revisions in Differential). Allowed values are "anyone",
// "verified", or "admin". Note that "anyone" includes users who are not
// logged in! You should leave this at 'verified' unless you want your data
// to be publicly readable (e.g., you are developing open source software).
'phabricator.read-access' => 'verified',
// Controls the minimum access level required to write data to Phabricator
// (e.g., create new revisions in Differential). Allowed values are
// "verified" or "admin". Setting this to "admin" will effectively create a
// read-only install.
'phabricator.write-access' => 'verified',
// -- DarkConsole ----------------------------------------------------------- //
// DarkConsole is a administrative debugging/profiling tool built into
// Phabricator. You can leave it disabled unless you're developing against
// Phabricator.
// Determines whether or not DarkConsole is available. DarkConsole exposes
// some data like queries and stack traces, so you should be careful about
// turning it on in production (although users can not normally see it, even
// if the deployment configuration enables it).
'darkconsole.enabled' => true,
// Always enable DarkConsole, even for logged out users. This potentially
// exposes sensitive information to users, so make sure untrusted users can
// not access an install running in this mode. You should definitely leave
// this off in production. It is only really useful for using DarkConsole
// utilties to debug or profile logged-out pages. You must set
// 'darkconsole.enabled' to use this option.
'darkconsole.always-on' => false,
// Allows you to mask certain configuration values from appearing in the
// "Config" tab of DarkConsole.
'darkconsole.config-mask' => array(
'mysql.pass',
'amazon-ses.secret-key',
'recaptcha.private-key',
'phabricator.csrf-key',
'facebook.application-secret',
'github.application-secret',
),
// -- MySQL --------------------------------------------------------------- //
// The username to use when connecting to MySQL.
'mysql.user' => 'root',
// The password to use when connecting to MySQL.
'mysql.pass' => '',
// The MySQL server to connect to.
'mysql.host' => 'localhost',
// -- Email ----------------------------------------------------------------- //
// Some Phabricator tools send email notifications, e.g. when Differential
// revisions are updated or Maniphest tasks are changed. These options allow
// you to configure how email is delivered.
// You can test your mail setup by going to "MetaMTA" in the web interface,
// clicking "Send New Message", and then composing a message.
// Default address to send mail "From".
'metamta.default-address' => 'noreply@example.com',
// Domain used to generate Message-IDs.
'metamta.domain' => 'example.com',
// When a user takes an action which generates an email notification (like
// commenting on a Differential revision), Phabricator can either send that
// mail "From" the user's email address (like "alincoln@logcabin.com") or
// "From" the 'metamta.default-address' address. The user experience is
// generally better if Phabricator uses the user's real address as the "From"
// since the messages are easier to organize when they appear in mail clients,
// but this will only work if the server is authorized to send email on behalf
// of the "From" domain. Practically, this means:
// - If you are doing an install for Example Corp and all the users will
// have corporate @corp.example.com addresses and any hosts Phabricator
// is running on are authorized to send email from corp.example.com,
// you can enable this to make the user experience a little better.
// - If you are doing an install for an open source project and your
// users will be registering via Facebook and using personal email
// addresses, you MUST NOT enable this or virtually all of your outgoing
// email will vanish into SFP blackholes.
// - If your install is anything else, you're much safer leaving this
// off since the risk in turning it on is that your outgoing mail will
// mostly never arrive.
'metamta.can-send-as-user' => false,
// Adapter class to use to transmit mail to the MTA. The default uses
// PHPMailerLite, which will invoke PHP's mail() function. This is appropriate
// if mail() actually works on your host, but if you haven't configured mail
// it may not be so great. You can also use Amazon SES, by changing this to
// 'PhabricatorMailImplementationAmazonSESAdapter', signing up for SES, and
// filling in your 'amazon-ses.access-key' and 'amazon-ses.secret-key' below.
'metamta.mail-adapter' =>
'PhabricatorMailImplementationPHPMailerLiteAdapter',
// When email is sent, try to hand it off to the MTA immediately. This may
// be worth disabling if your MTA infrastructure is slow or unreliable. If you
// disable this option, you must run the 'metamta_mta.php' daemon or mail
// won't be handed off to the MTA. If you're using Amazon SES it can be a
// little slugish sometimes so it may be worth disabling this and moving to
// the daemon after you've got your install up and running. If you have a
// properly configured local MTA it should not be necessary to disable this.
'metamta.send-immediately' => true,
// If you're using Amazon SES to send email, provide your AWS access key
// and AWS secret key here. To set up Amazon SES with Phabricator, you need
// to:
// - Make sure 'metamta.mail-adapter' is set to:
// "PhabricatorMailImplementationAmazonSESAdapter"
// - Make sure 'metamta.can-send-as-user' is false.
// - Make sure 'metamta.default-address' is configured to something sensible.
// - Make sure 'metamta.default-address' is a validated SES "From" address.
'amazon-ses.access-key' => null,
'amazon-ses.secret-key' => null,
// -- Auth ------------------------------------------------------------------ //
// Can users login with a username/password, or by following the link from
// a password reset email? You can disable this and configure one or more
// OAuth providers instead.
'auth.password-auth-enabled' => true,
// -- Accounts -------------------------------------------------------------- //
// Is basic account information (email, real name, profile picture) editable?
// If you set up Phabricator to automatically synchronize account information
// from some other authoritative system, you can disable this to ensure
// information remains consistent across both systems.
'account.editable' => true,
// -- Facebook ------------------------------------------------------------ //
// Can users use Facebook credentials to login to Phabricator?
'facebook.auth-enabled' => false,
// Can users use Facebook credentials to create new Phabricator accounts?
'facebook.registration-enabled' => true,
// Are Facebook accounts permanently linked to Phabricator accounts, or can
// the user unlink them?
'facebook.auth-permanent' => false,
// The Facebook "Application ID" to use for Facebook API access.
'facebook.application-id' => null,
// The Facebook "Application Secret" to use for Facebook API access.
'facebook.application-secret' => null,
// -- Github ---------------------------------------------------------------- //
// Can users use Github credentials to login to Phabricator?
'github.auth-enabled' => false,
// Can users use Github credentials to create new Phabricator accounts?
'github.registration-enabled' => true,
// Are Github accounts permanently linked to Phabricator accounts, or can
// the user unlink them?
'github.auth-permanent' => false,
// The Github "Client ID" to use for Github API access.
'github.application-id' => null,
// The Github "Secret" to use for Github API access.
'github.application-secret' => null,
// -- Recaptcha ------------------------------------------------------------- //
// Is Recaptcha enabled? If disabled, captchas will not appear.
'recaptcha.enabled' => false,
// Your Recaptcha public key, obtained from Recaptcha.
'recaptcha.public-key' => null,
// Your Recaptcha private key, obtained from Recaptcha.
'recaptcha.private-key' => null,
// -- Misc ------------------------------------------------------------------ //
// This is hashed with other inputs to generate CSRF tokens. If you want, you
// can change it to some other string which is unique to your install. This
// will make your install more secure in a vague, mostly theoretical way. But
// it will take you like 3 seconds of mashing on your keyboard to set it up so
// you might as well.
'phabricator.csrf-key' => '0b7ec0592e0a2829d8b71df2fa269b2c6172eca3',
// This is hashed with other inputs to generate mail tokens. If you want, you
// can change it to some other string which is unique to your install. In
// particular, you will want to do this if you accidentally send a bunch of
// mail somewhere you shouldn't have, to invalidate all old reply-to
// addresses.
'phabricator.mail-key' => '5ce3e7e8787f6e40dfae861da315a5cdf1018f12',
// Version string displayed in the footer. You probably should leave this
// alone.
'phabricator.version' => 'UNSTABLE',
// PHP requires that you set a timezone in your php.ini before using date
// functions, or it will emit a warning. If this isn't possible (for instance,
// because you are using HPHP) you can set some valid constant for
// date_default_timezone_set() here and Phabricator will set it on your
// behalf, silencing the warning.
'phabricator.timezone' => null,
// Phabricator can highlight PHP by default, but if you want syntax
// highlighting for other languages you should install the python package
// 'Pygments', make sure the 'pygmentize' script is available in the
// $PATH of the webserver, and then enable this.
'pygments.enabled' => false,
// -- Files ----------------------------------------------------------------- //
// Lists which uploaded file types may be viewed in the browser. If a file
// has a mime type which does not appear in this list, it will always be
// downloaded instead of displayed. This is a security consideration: if a
// user uploads a file of type "text/html" and it is displayed as
// "text/html", they can eaily execute XSS attacks. This is also a usability
// consideration, since browsers tend to freak out when viewing enormous
// binary files.
//
// The keys in this array are viewable mime types; the values are the mime
// types they will be delivered as when they are viewed in the browser.
'files.viewable-mime-types' => array(
'image/jpeg' => 'image/jpeg',
'image/jpg' => 'image/jpg',
'image/png' => 'image/png',
'image/gif' => 'image/gif',
'text/plain' => 'text/plain; charset=utf-8',
),
// Phabricator can proxy images from other servers so you can paste the URI
// to a funny picture of a cat into the comment box and have it show up as an
// image. However, this means the webserver Phabricator is running on will
// make HTTP requests to arbitrary URIs. If the server has access to internal
// resources, this could be a security risk. You should only enable it if you
// are installed entirely a VPN and VPN access is required to access
// Phabricator, or if the webserver has no special access to anything. If
// unsure, it is safer to leave this disabled.
'files.enable-proxy' => false,
// -- Differential ---------------------------------------------------------- //
'differential.revision-custom-detail-renderer' => null,
// -- Maniphest ------------------------------------------------------------- //
'maniphest.enabled' => true,
// -- Customization --------------------------------------------------------- //
// Paths to additional phutil libraries to load.
'load-libraries' => array(),
'aphront.default-application-configuration-class' =>
'AphrontDefaultApplicationConfiguration',
'controller.oauth-registration' =>
'PhabricatorOAuthDefaultRegistrationController',
// Directory that phd (the Phabricator daemon control script) should use to
// track running daemons.
'phd.pid-directory' => '/var/tmp/phd',
);

Owner Packages

  • No Owners